
“Repaired my cracked front bumper valence and broken headlight mounting tab—holds tighter than before and saved me a $600 body-shop bill!”
Brenda T. · ✔ Verified purchase

“This kit saved me over $500 on a cracked bumper cover. Heated red-hot in 3 seconds, sank wavy staples cleanly across the split, and feels rock solid.”
John J. · ✔ Verified purchase
“Super easy to control even as a total beginner! Being cordless let me repair our SUV bumper right in the driveway without removing a single bolt.”
Fiona Y. · ✔ Verified purchaseStop wasting money on brittle surface adhesives or costly part replacements—fuse stainless steel reinforcement staples directly inside the plastic.

Melts corrugated stainless steel staples directly across the fracture core so cooled plastic locks around solid metal bridges—stronger than the original molding.

Compact rechargeable lithium design goes straight under wheel arches, inside dashboards, onto boat trailers, or into the backyard with zero extension cords.

Ships complete with Flat staples, heavy-duty Wavy staples, 90° Inside Corner V-staples, and 90° Outside Corner M-staples to match every crack geometry.

Dial in 752°F (400°C), 932°F (500°C), or 1112°F (600°C) with 3-second trigger response, then snip staple prongs flush and dress smooth with the included file.
<< Drag slider, tap arrows, or select a view below >>





Instant 3-second dual-brass heating paired with 3 selectable heat levels, 4 staple geometries, and true USB-C cordless mobility.

Instant trigger-activated heating reaches 752°F (400°C), 932°F (500°C), or 1112°F (600°C) in 3 seconds—giving you pinpoint thermal control on ABS, PP, HDPE, and PVC.

Stainless steel staples sink cleanly across split plastic seams and lock inside the cooled polymer matrix, restoring structural flex and impact strength.

Tackle hairline straight cracks, wide load-bearing bumper splits, tight 90° interior corners, and outer box ridges with purpose-shaped stainless staples.

2000mAh USB-C cordless freedom + built-in front LED work light let you reinforce damaged plastic parts right in place without removing panels or hunting outlets.
| Feature | EVOQUEPLUS® Cordless Plastic Welder | Liquid Glues / Corded Welders |
|---|---|---|
| 100% Cordless USB-C Portability | ✅ 2000mAh rechargeable battery welds anywhere cord-free | ❌ Tethered to wall outlets with bulky transformer cords |
| 3-Second Instant Heating | ✅ Glows fusion-ready in 3 seconds; cools immediately on release | ❌ Slow 5–10 min warm-up or messy 24-hour glue cure |
| 3 Precision Temperature Levels | ✅ 752°F (400°C), 932°F (500°C) & 1112°F (600°C) LED modes | ❌ Fixed uncontrolled heat melts through thin plastics |
| Internal Stainless Steel Bridging | ✅ 4 staple shapes anchor cracks internally against flex & impact | ❌ Weak surface-only glue bonds snap open again |
| Smart Overheat Protection & LED Light | ✅ Auto thermal shut-off + front LED work beam + anti-slip grip | ❌ Exposed hot irons risk burns and lack illumination |
| All-In-One Molded Case Kit | ✅ Includes Welder, 4 Staple Packs, Pliers, Knife, File & Case | ❌ Sold bare without flush cutters, smoothing file, or case |

Rated 4.9/5 across 42,000+ garages and homes for rock-solid bumper, fairing, kayak, mower, and storage bin repairs.

“Repaired my cracked front bumper valence and broken headlight mounting tab—holds tighter than before and saved me a $600 body-shop bill!”
Brenda T. · ✔ Verified purchase
“First time ever plastic welding and I nailed it in minutes. The 3 heat modes and 4 staple shapes make flat splits and 90-degree corners effortless.”
David L. · ✔ Verified purchase
“Stitched a four-inch parking-lot crack on my silver bumper right in the driveway—cordless USB-C convenience and 3-second heat are absolute game changers.”
Megan T. · ✔ Verified purchase