EVOQUEFIT 3/16-Inch Brake Line Flaring Tool Kit
EVOQUEFIT · BRAKE LINE SERVICE
Form a 45° SAE flare on 3/16-inch brake tubing
A compact hand-operated tool for compatible automotive brake line repairs. The removable handle, positioning bolt and double-ended punch pack into a molded case.
Check the fit before ordering
Match the tube’s outside diameter and the flare profile required by your vehicle. The tool is sized for 3/16-inch (4.75 mm) tubing and 45° SAE flares. The OP1/OP2 punch supports the two stages of an SAE double flare. A DIN/ISO bubble fitting requires a matching flare tool.
What comes in each kit
- 3/16-inch flaring tool body and removable handle
- Positioning bolt and double-ended OP1/OP2 punch
- Flaring lubricant and molded storage case
The Two-Kit Set includes two complete kits.
How the tool works
- Confirm the required flare type and tubing diameter in the vehicle service information.
- Prepare a square, deburred tube end and slide the correct fitting onto the line.
- Set the tube position and form the flare using the tool instructions and the appropriate punch stages.
- Inspect the flare before installation. After service, follow the vehicle manufacturer’s bleeding and leak-check procedure before driving.
Specifications
| Tube outside diameter | 3/16 in (4.75 mm) |
|---|---|
| Flare standard | 45° SAE |
| Operation | Manual, removable handle |
| Reference weight | Approx. 0.4 kg per kit |
| Case dimensions | Approx. 150 × 90 × 50 mm |
Product details
[connect via dynamic source]
[connect via dynamic source]
[connect certification badges/images via dynamic source]
something something
- Organic cotton
- Something something
