
“Made hanging our kitchen upper and lower cabinets solo an absolute breeze. Every face-frame joint came out dead flush!”
Robert W. · ✔ Verified purchase

“This holding clip has been a game changer in my woodworking projects! Holds everything securely and lets me pre-drill straight through the bushing.”
Mary R. · ✔ Verified purchase
“Sturdy, heavy-duty metal and super smooth T-screws. Installed our entire wall of shaker cabinets solo with zero uneven seams!”
Carl F. · ✔ Verified purchaseLock both axes flush and bore dead-straight pilot holes through steel guide bushings without ever removing the clamp.

Integrated hardened steel guide sleeves let you bore dead-straight pilot holes right through the clip while your joint stays locked tight.

Tighten the side T-spindle to close the seam gap and turn the perpendicular T-spindle to align both front faces into one flush plane.

High-friction protective pads on the interior clamping plates grip painted, stained, and finished cabinetry with zero surface dents.

Lock top and bottom stiles simultaneously with our 2-Pack or 4-Pack bundles—freeing both hands to drill and drive fasteners safely.
<< Drag slider, tap arrows, or select a view below >>





Engineered to replace clumsy multi-clamp setups with fast, repeatable single-step alignment and guided drilling.

Hardened steel guide bushings support your twist drill bit at a true 90° angle—stopping edge blowouts on narrow cabinet stiles.

Smooth steel T-handle spindles apply balanced two-way clamping pressure so every cabinet seam feels like a single continuous board.

Work directly on finished white shaker doors, maple face frames, oak trim, and walnut cabinetry without marring or slipping.

Use two clips per vertical cabinet seam or four clips across multi-box kitchen runs to finish installations in half the time.
| Feature | EVOQUEPLUS® 2-in-1 Holding Clip | Ordinary C-Clamps / Bar Clamps |
|---|---|---|
| Drill Without Unclamping | ✅ Built-in steel guide bushings let you pre-drill while locked | ❌ Clamp blocks hole location; unclamping ruins alignment |
| Dual-Axis Flush Leveling | ✅ Two perpendicular T-screws align both gap & front plane | ❌ Single-axis squeeze leaves stepped frame edges |
| Hardened Steel Drill Sleeves | ✅ Prevents bit drift & screw blowouts on narrow stiles | ❌ Zero drill guidance — high risk of splitting wood |
| Non-Marring Cushion Pads | ✅ Pre-installed protective jaw pads prevent wood dents | ❌ Bare metal jaws crush grain and mar paint |
| Rigid Powder-Coated Metal | ✅ High-strength metal body resists flexing under torque | ❌ Plastic jigs warp and crack under pressure |
| True Solo One-Handed Setup | ✅ Holds cabinet boxes & frames steady by yourself | ❌ Needs a second helper holding stiles flush |

Rated 4.8/5 across 6,000+ workshop and kitchen remodel reviews for rock-solid clamping and straight pilot drilling.

“Made hanging our kitchen upper and lower cabinets solo an absolute breeze. Every face-frame joint came out dead flush!”
Robert W. · ✔ Verified purchase
“Being able to drill the pilot hole right through the steel bushing while everything stays clamped tight stopped all board creep.”
Mary R. · ✔ Verified purchase
“Ordered the 4-Pack with FREE shipping—solid metal construction, smooth threads, and zero marks on our painted shaker stiles.”
Carl F. · ✔ Verified purchase