
“The cast aluminum head and yellow thumb clamp seal super tight—zero leaks on my garage floor and paid for itself in one oil change!”
Garrett H. · ✔ Verified purchase

“Flipped the switch and watched 6 quarts of warm 5W-30 pump straight into my waste jug in minutes—never crawled under the truck once!”
Kenneth B. · ✔ Verified purchase
“Lifesaver for our SUV, riding lawn mower, and backup generator. Zero spilled oil on the deck and paid for itself on its very first oil change.”
Raymond P. · ✔ Verified purchaseSkip stripped drain plugs, stubborn plastic belly pans, and spilled catch pans—extract warm oil cleanly from above through the dipstick tube.

Slide the slim inlet probe down your dipstick tube and transfer warm Engine Oil, Lubricating Oil, Gear Oil, or ATF straight into a recycling jug from above.

High-conductivity pure copper windings deliver smooth 2800 RPM suction at 1–4 L/min (0.1–1.0 GPM) across SAE 0W-20 through 10W-40 grades.

Precision cast aluminum alloy pump head pairs with a push-lock inlet fitting and yellow thumb-screw hose clamp for leak-free directional flow.

Flexible recoiling cable extends neatly to your 12V battery (or optional 24V truck battery) with heavy-duty Red (+) and Black (-) copper-plated clamps.
<< Drag slider, tap arrows, or select a view below >>





High-conductivity 100W copper windings paired with precision-sealed aluminum ports, coiled battery leads, and multi-engine versatility.

Insert the slim dipstick tube, flip the rocker switch, and watch used oil flow cleanly through sealed clear tubing straight into your disposal container.

Engineered with pure copper windings for stable electrical efficiency and a rugged cast-aluminum head that resists heat, wear, and air leaks.

Handles thin 0W-20 / 5W-20 up to 1.0 GPM (4 L/min) and heavier 5W-30 / 10W-40 oils down to 0.1 GPM when warmed slightly before pumping.

Compact portable body stores easily in any trunk or toolbox and services everything from family SUVs and motorcycles to lawn mowers and backup generators.
| Feature | EVOQUEPLUS® 100W Oil Transfer Pump | Under-Car Draining / Hand Pumps |
|---|---|---|
| Zero-Jack Standing Operation | ✅ Extracts from the top through dipstick tube in clean clothes | ❌ Requires floor jacks, ramps & crawling on cold concrete |
| 100W / 2800 RPM Pure Copper Motor | ✅ Steady 1–4 L/min motorized suction up to 30-min duty cycle | ❌ Exhausting hand-pumping or weak motors that bog down |
| Cast Aluminum Alloy Pump Head | ✅ Metal head + clamped fittings prevent drips & air leaks | ❌ Thin plastic barbs crack and pop hoses off mid-job |
| Coiled Cord + Copper Battery Clamps | ✅ Tangle-free recoiling cable clips right onto 12V/24V battery | ❌ Tangled loose wires or tethered to 110V wall outlets |
| Small-Engine & Mower Friendly | ✅ Drains mowers, ATVs & generators cleanly from top fill port | ❌ Forces messy tipping or spilling oil across mower decks |
| Complete Ready-To-Pump Package | ✅ Includes 100W Pump, Coiled Clamps, Inlet/Outlet Hoses & Clamps | ❌ Sold bare without dipstick probe or locking clamps |

Rated 4.9/5 across 38,000+ home garages, shops, and fleets for fast, spotless top-side fluid changes.

“The cast aluminum head and yellow thumb clamp seal super tight—zero leaks on my garage floor and paid for itself in one oil change!”
Garrett H. · ✔ Verified purchase
“Love that it clips straight onto the 12V car battery with heavy copper clamps and a coiled cord that never tangles. Drained both cars in 20 minutes.”
Dennis W. · ✔ Verified purchase
“Used mine on my pickup truck, ATV, and portable generator—watching the old oil pump straight into an empty 5-quart jug is so satisfying!”
Trevor K. · ✔ Verified purchase