✅ Garage, Fleet & Auto Shop Proven: 12,000+ Sets Sold Worldwide🏆 #1 Flexible Non-Marring Magnetic Tool Tray Organizer Set
Grips Curved Fenders & Vertical Steel Without Scratching Paint — Locks Every Wrench, Socket & Bolt Tight

Grips Curved Fenders & Vertical Steel Without Scratching Paint — Locks Every Wrench, Socket & Bolt Tight

High-Density Rare-Earth Magnet Matrix + Bendable Non-Marring Polymer/Silicone Shell + Oil & Grease Wipe-Clean Surface + 3 Slim Drawer-Ready Sizes (Small 4.33" · Medium 12.8" · XL 12.8"×9.64").

Only 43 left — Grab yours before the price goes back up!
⚡
Industrial Magnet Matrix
🛡️
Hugs Curved & Vertical Steel
✨
Scratch-Free Paint Barrier
🔧
Oil-Resistant & Wipe-Clean
CHOOSE YOUR TRAY BUNDLE — 50% OFF →
🛡️ 90-day money-back guarantee · FREE shipping over $99.99 🔥 Limited stock left at 50% OFF
★★★★★ 12,000+ Verified Positive Reviews

Zero Dropped 10mm Sockets, Zero Scratched Fenders & Instant 3-Zone Shop Organization

✔ Holds Vertically & Upside Down✔ Conforms To Curved Fenders✔ Non-Marring Soft Shell✔ 3 Sizes (S + M + XL)✔ Oil & Grease Wipe-Clean✔ Slim Drawer Fit
John J.
★★★★★

“Sticks vertically right onto curved quarter panels and holds my heavy 3/8" ratchet and sockets without sliding or leaving a mark!”

John J. · ✔ Verified purchase
Fiona L.
★★★★★

“Even on steep angled body panels, the small square tray locks deep sockets and lug bolts right where I need them. Genius flexible design!”

Fiona L. · ✔ Verified purchase

Tired Of Dropped Sockets, Tipping Bowls & Scratched Clear-Coat Paint?

90% of lost fasteners and messy repairs happen because rigid trays cannot adapt to real-world curved workspaces.

Weak bargain trays lose grip on tilts and vibrations—dumping sockets, screws, and bits into engine bays or under vehicles
❌ Weak bargain trays lose grip on tilts and vibrations—dumping sockets, screws, and bits into engine bays or under vehicles
✔ Our Solution

Full-Footprint Industrial Rare-Earth Magnet Matrix

High-density multi-pole magnets embedded across every square inch lock wrenches, ratchets, sockets, and tiny screws horizontally, vertically, or upside down.

Rigid metal bowls and bulky wooden or plastic caddies skate right off modern curved fenders and gouge painted surfaces
❌ Rigid metal bowls and bulky wooden or plastic caddies skate right off modern curved fenders and gouge painted surfaces
✔ Our Solution

Bendable Non-Marring Polymer & Silicone Contour

Supple flexible construction wraps smoothly over sloped hoods, crowned fenders, strut towers, and fuel tanks while shielding delicate paint from scratches.

Single round magnetic dishes jumble greasy bolts, sockets, and wrenches into one pile and jam shallow toolbox drawers
❌ Single round magnetic dishes jumble greasy bolts, sockets, and wrenches into one pile and jam shallow toolbox drawers
✔ Our Solution

3 Optimized Sizes With Ultra-Slim Drawer Profile

Sort fasteners in the 4.33"×4.33" Small tray, socket rows on the 12.8"×4.33" Medium strip, and full wrench sets on the 12.8"×9.64" XL mat—then slide flat into any drawer.

Chaotic workbenches swallow small hardware while porous mats absorb filthy motor oil, grease, and shop solvents
❌ Chaotic workbenches swallow small hardware while porous mats absorb filthy motor oil, grease, and shop solvents
✔ Our Solution

Oil, Grease & Heat-Resistant Wipe-Clean Shell

Non-porous workshop-grade exterior resists motor oil, brake fluid, coolant, and shop grime—wiping clean in seconds with a damp rag.

360° INSPECT THE FLEXIBLE MAGNETIC TOOL TRAY SET

<< Drag slider, tap arrows, or select a tray view below >>

Complete 3-Piece Set (Small + Medium + XL)XL Large Tray (12.8" × 9.64" / 32.5 × 24.5 cm)Medium Strip Tray (12.8" × 4.33" / 32.5 × 11 cm)Small Fastener Tray (4.33" × 4.33" / 11 × 11 cm)Loaded Wrench, Socket & Drawer Showcase

Engineered For Commercial Auto Bays, Mobile Service Trucks & Home Garages

Multi-pole embedded rare-earth magnets sealed inside a supple, chemical-resistant non-marring polymer skin.

LIVE DEMO · CURVED & VERTICAL GRIPConforms To Curved Panels & Holds Vertically

Conforms To Curved Panels & Holds Vertically

Bends effortlessly over rounded car fenders, truck doors, lift columns, and curved machinery while locking heavy chrome tools securely in place.

LIVE DEMO · 3-SIZE MAGNET MATRIX3 Tailored Sizes + Embedded Rare-Earth Grid

3 Tailored Sizes + Embedded Rare-Earth Grid

High-density internal magnet blocks secure ferrous parts edge-to-edge across Small (4.33" sq), Medium (12.8"×4.33"), and XL (12.8"×9.64") trays.

PAINT-SAFE NON-MARRING CONTOURZero Clear-Coat Scratches On Delicate Bodywork

Zero Clear-Coat Scratches On Delicate Bodywork

Textured soft polymer exterior and raised protective red perimeter trim keep sharp metal tools isolated from automotive paint and polished finishes.

SHOP-TOUGH & WIPE-CLEANResists Oil, Grease, Solvents & Engine-Bay Heat

Resists Oil, Grease, Solvents & Engine-Bay Heat

Built for daily commercial bay abuse—never rusts, cracks, or stains, and wipes spotless with a single pass of a damp shop towel.

EVOQUEPLUS® Flexible Magnetic Tray Set vs. Rigid Metal & Plastic Trays

Feature EVOQUEPLUS® Flexible Magnetic Set Rigid Metal Bowls / Plastic Trays
Industrial-Strength Vertical Magnetic Hold ✅ Full-surface magnet matrix locks wrenches, ratchets & bolts ❌ Weak spot magnets or non-magnetic plastic drop hardware
Curved Fender & Tank Adaptability ✅ Bends smoothly over sloped hoods, fenders & rounded tanks ❌ Rigid flat bases teeter and slide off curved sheet metal
Scratch-Free Paint Protection ✅ Soft non-marring polymer skin shields clear-coat finishes ❌ Exposed metal bottoms gouge paint and chrome trim
3-Zone Multi-Size Organization ✅ Small (4.33"), Medium (12.8"×4.33") & XL (12.8"×9.64") ❌ Single small dish mixes dirty fasteners & tools together
Oil, Grease & Heat Resistance ✅ Sealed chemical-resistant surface wipes clean in seconds ❌ Plastic warps near heat; cheap steel chips and rusts
Shallow Tool-Chest Drawer Fit ✅ Ultra-slim flat mat profile stores inside shallow drawers ❌ Tall bulky magnetic bowls block drawers from closing
Product Specifications

Product Specifications

Construction & Shell: Flexible Non-Marring Polymer / Silicone Composite With Raised Protective Red Perimeter Trim
Magnetic Core: Embedded Multi-Pole Industrial Rare-Earth Magnet Matrix (Attracts All Ferrous Tools & Fasteners)
XL Large Tray Dimensions: 12.8 in × 9.64 in (32.51 cm × 24.3 cm) — Ideal For Wrench Sets, Pliers, Ratchets & Breaker Bars
Medium & Small Tray Sizes: Medium: 12.8 in × 4.33 in (32.51 × 11 cm) · Small Square: 4.33 in × 4.33 in (11 × 11 cm)
Surface Compatibility: Flat, Sloped, Curved, Vertical & Overhead Ferrous Metal Panels + Non-Slip Grip On Workbenches
Shop Fluid & Heat Durability: Resistant To Motor Oil, Transmission Fluid, Grease & Engine-Bay Heat · Damp-Cloth Wipe Clean
Bundle Options Available: Single XL Tray (12.8"×9.64") · Complete 3-Piece Set (S+M+XL, FREE Shipping) · 2× 3-Piece Sets (6 Trays, FREE Shipping)

Why Mechanics, Fleet Techs & DIYers Swear By EVOQUEPLUS®

Rated 4.9/5 across 12,000+ garages and repair bays for vertical magnetic holding strength, paint-safe flexibility, and effortless cleanup.

Brenda T.
★★★★★

“Stuck the XL tray straight onto my two-post lift column—holds two ratchets and long extensions horizontally all day without slipping a millimeter!”

Brenda T. · ✔ Verified purchase
David L.
★★★★★

“Mounted all three sizes vertically on the side of my rolling steel tool cabinet. Screws, hex bits, and wrenches stay organized and oil wipes right off.”

David L. · ✔ Verified purchase
Megan T.
★★★★★

“Rock-solid vertical hold on metal shop doors even with heavy 1/2-inch chrome ratchets, and completely gentle on painted surfaces. Must-have shop upgrade.”

Megan T. · ✔ Verified purchase

Frequently Asked Questions

Q1: Will these magnetic trays scratch automotive clear-coat paint or powder-coated toolboxes? ▾
No! Unlike bare stamped-steel magnetic bowls, every EVOQUEPLUS® tray completely encases its magnet grid inside a soft, textured, non-marring polymer-and-silicone shell that cushions painted fenders, hoods, motorcycle tanks, and tool chests against scratches.
Q2: Can the trays hold heavy tools vertically or upside down? ▾
Yes! The high-density embedded rare-earth magnet matrix grips both the steel mounting panel behind the tray and your ferrous tools on top—securely holding combination wrenches, ratchets, deep sockets, pliers, screws, and nuts on vertical doors, lift posts, and angled fenders.
Q3: What exact sizes come in the Complete 3-Piece Set? ▾
The Complete 3-Piece Set includes all three workshop sizes: 1× Small Square Tray (4.33" × 4.33" / 11 × 11 cm) for nuts, bolts, and screws; 1× Medium Strip Tray (12.8" × 4.33" / 32.5 × 11 cm) for socket rows and extensions; and 1× XL Large Tray (12.8" × 9.64" / 32.5 × 24.5 cm) for wrenches, pliers, and ratchets.
Q4: Do they work on non-metallic surfaces like aluminum fenders, fiberglass, or wood benches? ▾
Yes! While the tray magnetically locks itself onto steel panels, its grippy flexible polymer backing also resists sliding on sloped aluminum hoods, composite engine covers, fiberglass fenders, and wooden workbenches—while still magnetically locking all your steel tools and fasteners inside the tray!
Q5: Which bundle option is the best value? ▾
Over 80% of customers pick either our 🔥 Best-Selling Complete 3-Piece Set ($105.99 — includes Small + Medium + XL Large + FREE Priority Shipping!) or our 💎 2× Complete 3-Piece Sets Garage & Truck Bundle ($189.99 for 6 Trays Total — just $95.00/Set, saving an extra $22 + FREE Priority Shipping!).
Q6: How do I clean them, and what if I'm not 100% satisfied? ▾
Cleanup takes seconds—simply wipe away oil, grease, or shop dust with a damp cloth or shop towel. Every order is backed by our 90-Day No-Questions-Asked Money-Back Guarantee: test them in your garage or shop risk-free for 90 full days!