✅ Carpenter & DIYer Proven: 53,000+ Solid CNC Aluminum Protractors Sold🏆 TWICE THE THICKNESS (159G / 12MM) · ZERO-MATH DUAL SCALES
Measure Any Corner. Set Your Saw Directly. Cut Gap-Free Trim With Confidence.

Measure Any Corner. Set Your Saw Directly. Cut Gap-Free Trim With Confidence.

Heavy-Duty 159g (12mm Thick) CNC Anodized Aluminum Body + Zero-Math Direct Miter & Single Cut Laser Scales + Smooth 360° Internal O-Ring Swivel For Inside & Outside Corners.

Only 29 left — Grab yours before the price goes back up!
⚡
Zero-Math Miter & Single Scales
🛡️
2× Thicker 159g CNC Aluminum
✨
360° Inside & Outside O-Ring Swivel
🔧
Deep Glare-Free Laser Engraving
CHOOSE YOUR PROTRACTOR BUNDLE — 50% OFF →
🛡️ 90-day money-back guarantee · FREE Priority Shipping from $99.99 🔥 Limited stock left at 50% OFF
★★★★★ 53,000+ Verified Positive Reviews

Trusted By Finish Carpenters & Homeowners For Cleaner Miter Cuts On The First Try

✔ 159g Solid CNC Aluminum✔ 12mm Thick Hub Build✔ Direct Miter & Single Scales✔ Smooth 360° O-Ring Swivel✔ Permanent Laser Engraving✔ Inside & Outside Corners
Eric Dixon
★★★★★

“Zero gaps on our 1960s crooked walls! You just read the inner arrow and set your saw—no dividing by two.”

Eric Dixon · ✔ Verified purchase
Dennis Watson
★★★★★

“Twice as thick and solid as cheap protractors. Laser-etched numbers are razor sharp and easy to read.”

Dennis Watson · ✔ Verified purchase

94% Of Home Wall Corners Are NOT 90° — Stop Ruining Expensive Trim On Guesswork

Transfer the exact real-world corner angle directly to any standard miter saw with zero formulas.

Assuming walls are 90° leaves ugly open gaps on expensive crown molding and baseboards
❌ Assuming walls are 90° leaves ugly open gaps on expensive crown molding and baseboards
✔ Our Solution

Measures Real Inside & Outside Angles Instantly

Captures true 87°–93° out-of-square drywall corners so two trim pieces meet paper-tight on the first cut.

Mental fraction math & dividing odd angles by two on a ladder causes costly miscuts
❌ Mental fraction math & dividing odd angles by two on a ladder causes costly miscuts
✔ Our Solution

Dual Direct-Read Miter Cut & Single Cut Scales

Inner Scale gives your exact two-piece miter angle; Outer Scale gives your exact single-piece butt angle.

Flimsy plastic & 75g thin aluminum tools flex on corners and rub off their ink numbers
❌ Flimsy plastic & 75g thin aluminum tools flex on corners and rub off their ink numbers
✔ Our Solution

159g / 12mm Solid CNC Anodized Aluminum + Laser Etching

Over 2× the weight and thickness of generic versions with permanent white-on-black laser scales.

Loose pivot joints slip while walking from the wall corner back to your miter saw
❌ Loose pivot joints slip while walking from the wall corner back to your miter saw
✔ Our Solution

Smooth 360° Internal Precision O-Ring Mechanism

Rotates silk-smooth across a full circle while holding rock-solid tension until you set your saw.

360° INSPECT THE 7-INCH CNC ALUMINUM MITER SAW PROTRACTOR

<< Drag slider, tap arrows, or select a view below >>

Most Popular Workshop & Tool-Bag 2-Pack7-Inch Anodized Aluminum Front OverviewDual Laser Scales & Precision Pivot DetailInner Miter Scale vs. Outer Single Cut Guide159g / 12mm Solid Build vs. 75g Thin Generic

Built Different: Twice The Thickness & Machinists' Grade Precision

Engineered for crown molding, baseboards, door casings, picture frames, decking, and custom joinery.

LIVE DEMO · ZERO-MATH DIALDirect Transfer From Wall Corner To Miter Saw

Direct Transfer From Wall Corner To Miter Saw

Fit the arms into any corner, read the laser arrow on the Inner or Outer ring, and dial your miter saw straight to that degree.

LIVE DEMO · 360° O-RING SWIVELInside Corners, Outside Wraps & Overhead Rafters

Inside Corners, Outside Wraps & Overhead Rafters

Full 360-degree smooth rotation measures tight alcoves, bullnose trim, stair stringers, and ceiling beams effortlessly.

2× THICKER · 159G SOLID CNC12mm Thick Anodized Aluminum That Never Warps

12mm Thick Anodized Aluminum That Never Warps

Twice the thickness (0.47 in vs. 0.24 in) and over double the weight of thin generic protractors for lifetime workshop accuracy.

WORKS WITH ANY MITER SAWFirst-Try Tight Joints On Trim, Frames & Decking

First-Try Tight Joints On Trim, Frames & Decking

No saw attachment needed—compatible with every standard compound, sliding, or hand miter saw in your shop.

EVOQUEPLUS® Solid CNC Protractor vs. Plastic & Thin Imitations

Feature EVOQUEPLUS® 159g Solid CNC Plastic & 75g Thin Versions
159g / 12mm Solid CNC Aluminum ✅ Heavy-duty warp-free anodized aluminum build ❌ Flimsy plastic or 75g / 6mm thin sheet
Zero-Math Dual Direct Scales ✅ Dedicated Inner (Miter) & Outer (Single) readings ❌ Requires manual division & angle formulas
Deep Laser-Etched Markings ✅ Permanent high-contrast white-on-black scales ❌ Printed ink rubs off in sawdust
360° Precision O-Ring Tension ✅ Smooth full-circle swivel holds angle steady ❌ Loose pivot shifts before reaching saw
Inside & Outside Corner Ready ✅ Fits alcoves, outside corners, frames & rafters ❌ Restricted stop blocks
90-Day Money-Back Guarantee ✅ Risk-free 90-day trial on real trim projects ❌ No satisfaction guarantee
Product Specifications

Product Specifications

Material & Finish: Solid CNC-Machined Anodized Aluminum Alloy (Matte Black, Rust & Corrosion Resistant)
Dimensions & Thickness: 7.28 in × 2.51 in (18.5 × 6.4 cm) · 12 mm (0.47 in) Center Dial Hub / 0.39 in Arms
Solid Weight: 159 g / 5.6 oz Net Solid Aluminum Build (~0.60 lb With Retail Storage Box)
Scale System: Deep Laser-Engraved Dual Scales — Inner Scale (Miter Cut) & Outer Scale (Single Cut)
Rotation Mechanism: 360° Smooth Internal Precision O-Ring Swivel (Inside & Outside Angles) + Dual Peg Holes
Package Contents: 1× EVOQUEPLUS® 7-Inch CNC Anodized Aluminum Miter Saw Protractor + Protective Box (Per Unit)

Why 53,000+ Woodworkers & DIYers Love EVOQUEPLUS®

Rated 4.9/5 across trim carpentry, cabinet installs, crown molding, and weekend home renovations.

Kevin Harvey
★★★★★

“Transferring crooked baseboard angles straight to my miter saw without dividing by two saved me hours!”

Kevin Harvey · ✔ Verified purchase
Eric Dixon
★★★★★

“Heavy, rock-solid CNC aluminum with crystal-clear laser markings. Every crown molding corner came out tight.”

Eric Dixon · ✔ Verified purchase
Dennis Watson
★★★★★

“Fits right in my tool belt pocket and the O-ring holds the exact angle from ladder to saw. Worth every cent!”

Dennis Watson · ✔ Verified purchase

Frequently Asked Questions

Q1: Will this work with my brand of miter saw? ▾
Yes! The protractor does not need to bolt onto your saw. You measure the wall corner or workpiece first, read the exact degree on the dial, and set any standard compound, sliding, or hand miter saw directly to that angle.
Q2: What is the difference between the Inner 'Miter Cut' scale and Outer 'Single Cut' scale? ▾
Use the Inner Scale (Miter Cut) whenever two mitered pieces meet at an inside or outside corner—it automatically divides the angle in half with zero math! Use the Outer Scale (Single Cut) when fitting one piece flush against an existing wall, ceiling rafter, or post.
Q3: How is this different from cheaper miter protractors? ▾
Cheap plastic or thin stamped protractors weigh ~75g (6mm thin) and flex on uneven corners. EVOQUEPLUS® is CNC-machined from 12mm-thick solid anodized aluminum weighing 159g (5.6 oz) with deep laser-engraved markings and a precision internal O-ring.
Q4: Which bundle offers the best value? ▾
Our 🔥 Most Popular 2-Pack ($88.97 — just $44.49/each, saving $40.97!) lets you keep one at your miter saw bench and one in your tool bag, while upgrading to our 💎 Best-Value 3-Pack ($108.97 — only $36.32/each!) crosses $99.99 and unlocks FREE Priority Insured Shipping!
Q5: What if I'm not 100% satisfied? ▾
Every EVOQUEPLUS® order is backed by our 90-Day No-Questions-Asked Money-Back Guarantee. Try it on your next trim or woodworking project risk-free for 90 days!