✅ Cabinet & Furniture Shop Proven: 42,000+ Sets In Woodshops Worldwide🏆 #1 CNC High-Carbon Steel Square Hole Mortising Chisel & Adapter System
Punch Crisp, Burr-Free 90° Square Mortise & Tenon Joints Without Exhausting Manual Chiseling

Punch Crisp, Burr-Free 90° Square Mortise & Tenon Joints Without Exhausting Manual Chiseling

Razor 4-Corner Hollow Chisel + Self-Centering Inner Auger Core + Clog-Free U-Flute Chip Chute + Heat-Treated High-Carbon Steel (4-Bit & 6-Bit Sets With Optional Bench Drill-Press Mortising Adapter Bracket!).

Only 34 left — Grab yours before the price goes back up!
⚡
True 90° Square Mortise Cuts
🛡️
CNC Heat-Treated Carbon Steel
✨
Fast U-Flute Chip Ejection
🔧
Drill-Press Adapter Kits Ready
CHOOSE YOUR MORTISING KIT — 50% OFF →
🛡️ 90-day money-back guarantee · FREE Priority Shipping from $99.99 🔥 Limited stock left at 50% OFF
★★★★★ 42,000+ Verified Positive Reviews

Heirloom Mortise & Tenon Joinery For Tables, Chairs, Cabinets, Doors & Timber Frames

✔ 1/4" To 5/8" (6.4–16mm) Sizes✔ 4-Corner Spurs + Rotary Auger✔ High-Carbon Tool Steel✔ Anti-Clog U-Shape Chip Slot✔ 19mm (3/4") Standard Collar✔ Optional Drill-Press Bracket
Warren V.
★★★★★

“Clamped the Adapter Bracket onto my bench drill press and cut 32 crisp 3/8" mortises in white oak chair legs in under an hour—zero hand paring!”

Warren V. · ✔ Verified purchase
Leonard S.
★★★★★

“Heavy CNC high-carbon steel with razor-sharp 4-corner tips and wide U-slots that never pack up with sawdust. Best $99.99 upgrade in my shop.”

Leonard S. · ✔ Verified purchase

Stop Splitting Expensive Hardwood Or Spending $500+ On A Dedicated Mortiser

Cut clean, parallel-walled square holes and elongated tenon mortises 5× faster with repeatable machine accuracy.

Chopping out round drill holes by hand with a mallet takes 40 minutes per joint and splits visible wood grain
❌ Chopping out round drill holes by hand with a mallet takes 40 minutes per joint and splits visible wood grain
✔ Our Solution

Dual-Action Auger + 4-Corner Square Chisel

Inner rotary auger clears center wood while four inward-beveled chisel spurs pare crisp 90° square corners simultaneously.

Cheap soft-steel bits dull fast and narrow sleeves jam tight with scorching hot wood chips
❌ Cheap soft-steel bits dull fast and narrow sleeves jam tight with scorching hot wood chips
✔ Our Solution

Heat-Treated Carbon Steel + Extended U-Chute

CNC-machined high-carbon steel stays sharp in oak, walnut, and maple while the wide U-shape chute ejects shavings continuously.

Dedicated floor mortising machines cost $450–$700 and eat up precious garage floor space
❌ Dedicated floor mortising machines cost $450–$700 and eat up precious garage floor space
✔ Our Solution

Cast Bench Drill-Press Mortising Adapter Kits

Our Pro 4-Bit ($89.99) & Master 6-Bit ($99.99) Kits include the heavy-duty cast Adapter Bracket that converts compatible bench drill presses into mortisers!

Buying individual mortise chisel sizes piecemeal costs $25–$35 per bit without covering furniture & timber projects
❌ Buying individual mortise chisel sizes piecemeal costs $25–$35 per bit without covering furniture & timber projects
✔ Our Solution

Complete 4-Size (1/4"–1/2") Or 6-Size (1/4"–5/8") Sets

Cover everything from delicate drawer frames (6.4mm / 1/4") to heavy workbench & pergola tenons (16mm / 5/8") in one organized set.

360° INSPECT THE SQUARE HOLE MORTISING SYSTEM

<< Drag slider, tap arrows, or select a kit view below >>

Master Adapter Bracket + 6-Bit Kit (6.4–16mm)Pro Adapter Bracket + 4-Bit Kit (6.4–12.7mm)6 Precision Sizes: 1/4", 5/16", 3/8", 1/2", 9/16", 5/8"4-Corner Spur Bevel, U-Chute & 19mm CollarClean Square Holes & Deep Rectangular Mortises

Precision CNC Metallurgy Engineered For Clean, Effortless Joinery

Every detail—from inward-scoring corner spurs to polished spiral flutes—is built for smooth, low-resistance hardwood & softwood plunging.

LIVE DEMO · 90° SQUARE PUNCHINGBores & Squares All 4 Corners Simultaneously

Bores & Squares All 4 Corners Simultaneously

Self-centering brad-point inner core prevents wandering while the 4-corner hollow chisel shears crisp 90° walls.

LIVE DEMO · ANTI-CLOG U-FLUTERapid Shaving Ejection Up To 75mm Plunge Depth

Rapid Shaving Ejection Up To 75mm Plunge Depth

Wide U-shape chip slot evacuates hardwood and softwood curls smoothly without clogging, smoking, or jamming.

MORTISER & DRILL-PRESS READYStandard 19mm (3/4") Collar Fits Mortisers & Adapter

Standard 19mm (3/4") Collar Fits Mortisers & Adapter

Universal 19mm upper sleeve collar mounts directly into benchtop mortising machines or our cast Drill-Press Adapter Bracket.

HARDWOOD & SOFTWOOD JOINERYIdeal For Oak, Walnut, Maple, Pine, Birch & MDF

Ideal For Oak, Walnut, Maple, Pine, Birch & MDF

Build rock-solid dining tables, cabinet doors, chairs, bed frames, sawhorses, and garden structures that last generations.

EVOQUEPLUS® Square Hole Mortising Bits vs. Hand Chisels & Spade Bits

Feature EVOQUEPLUS® Square Hole System Hand Chiseling / Round Bits
True 90° Square Corners In Seconds ✅ Auger + 4-corner chisel cuts clean square holes in one pass ❌ Round drill holes require slow, risky hand chiseling
Heat-Treated High-Carbon Steel ✅ CNC-ground hardened steel holds edge in dense hardwoods ❌ Soft steel blunts and bends under plunge pressure
Anti-Jam U-Shape Chip Chute ✅ Expels wood shavings fast with zero friction burn ❌ Packs sawdust inside sleeve and scorches wood
Bench Drill-Press Adapter Option ✅ Pro & Master Kits include cast Mortising Holder Bracket ❌ Forces $500 mortiser purchase or unusable bare bits
Splinter-Free Perimeter Spurs ✅ 4 corner spurs score wood fibers cleanly before shearing ❌ Crushes pine grain and tears out visible shoulders
Full Imperial/Metric Range (1/4"–5/8") ✅ Up to 6 precision sizes from 6.4mm to 16mm ❌ Expensive single bits sold one by one
Product Specifications

Product Specifications

Blade & Core Metallurgy: CNC-Machined Heat-Treated High-Carbon Tool Steel · Polished U-Shape Chip Ejection Chute
4-Piece Bit Sizes (D1): 1/4" (6.4mm) · 5/16" (8mm) · 3/8" (9.5mm) · 1/2" (12.7mm)
6-Piece Master Sizes (D1): 1/4" (6.4mm) · 5/16" (8mm) · 3/8" (9.5mm) · 1/2" (12.7mm) · 9/16" (14mm) · 5/8" (16mm)
Collar & Plunge Depth: Standard 19mm (3/4") Upper Clamping Collar (D2) · 47mm–75mm Slotting Depth (L1) · 165mm–210mm Overall Length (L2)
Machine Compatibility: Fits Square-Hole Mortising Machines Directly · Fits Compatible Bench Drill Presses Using Included Adapter Bracket (Pro & Master Kits)
Hand-Drill Usage Note: Cannot spin outer square sleeve in a bare hand drill; with a hand drill, bore center hole with inner core first, then tap outer square sleeve with a mallet

Why Woodworkers & Cabinetmakers Trust EVOQUEPLUS®

Rated 4.9/5 across home workshops and custom furniture studios for clean 90° corners and fast chip clearance.

Russell T.
★★★★★

“Shavings pour right out of the U-slot without jamming once! Cut dead-square mortises in maple table aprons in a fraction of the time.”

Russell T. · ✔ Verified purchase
Howard C.
★★★★★

“The Master Adapter + 6-Bit Kit fit my benchtop drill press quill cleanly and saved me $450 vs. buying a standalone mortiser.”

Howard C. · ✔ Verified purchase
Brian K.
★★★★★

“Zero tear-out and razor-flat mortise walls in both red oak and pine. Having all 6 sizes up to 5/8" with FREE shipping is unbeatable.”

Brian K. · ✔ Verified purchase

Frequently Asked Questions

Q1: Do I need a mortising machine, or will these work on my bench drill press or hand drill? ▾
If you already own a square-hole mortising machine, the 19mm (3/4") collar fits right in (choose Option 1: 4-Bit Starter Set, or Option 3 for 6 bits + spare bracket). If you use a bench drill press, choose Option 2 (Adapter + 4 Bits) or Option 3 (Adapter + 6 Bits)—both include the cast Mortising Adapter Bracket that holds the outer square chisel stationary while your chuck spins the inner auger! (If using only a handheld drill, bore the pilot hole with the inner core bit first, then tap the outer square sleeve through with a wooden mallet.)
Q2: Which bench drill presses fit the Mortising Adapter Bracket? ▾
The cast Mortising Adapter Bracket includes reducer bushings designed for standard benchtop and floor drill presses with an exposed quill collar (~38mm–55mm / 1.5"–2.16" clamping range) and sufficient vertical quill travel.
Q3: How do I prevent overheating or binding when cutting deep hardwood mortises? ▾
Leave ~0.8mm–1mm (about the thickness of a dime) clearance between the inner auger cutters and the inside bevel of the square chisel when chucking the bit, plunge both end holes of your mortise first so chips have open room to escape, and step-plunge in 1/2" increments on dense oak or walnut!
Q4: Why do 9 out of 10 woodworkers pick the Master Adapter + 6-Bit Kit ($99.99)? ▾
Do the math: the Pro Adapter + 4-Bit Kit ($89.99) + $6.99 standard shipping totals $96.98, whereas the 💎 Master Adapter + 6-Bit Kit ($99.99) crosses our $99.99 threshold for FREE Priority Insured Shipping—so for just $3.01 more, you get two extra heavy-duty mortising bits (9/16" / 14mm & 5/8" / 16mm) plus FREE shipping!
Q5: What if it doesn't fit my drill press or meet my expectations? ▾
Every EVOQUEPLUS® order is protected by our 90-Day No-Questions-Asked Money-Back Guarantee. Test it in your workshop—if you aren't 100% thrilled, return it within 90 days for a full refund.