Automotive, Garage & Workshop Gear Report
Home > Magnetic Tool Storage & Shop Organization > EVOQUEPLUS® Flexible Magnetic Tool Tray Set

I Used To Watch 10mm Sockets Vanish Into Engine Bays & Metal Trays Scratch Paint… Until This Flexible Magnetic Tool Tray Hugged Every Curved Fender Without Slipping

Mark Chen
By Mark Chen, Automotive & Workshop Gear Editor ✔ Verified
EVOQUEPLUS® Flexible Magnetic Tool Tray Set

Every mechanic and weekend DIYer knows that gut-sinking moment: hearing an expensive 10mm socket clatter into the dark abyss of an engine bay—or worse, watching a rigid metal magnetic bowl slide down a curved fender and gouge $3,000 worth of clear-coat paint.

Traditional steel magnetic bowls and stiff plastic trays only sit flat on level workbenches; set them on a sloped hood, curved quarter panel, motorcycle fuel tank, or vibrating engine shroud and they tip or scratch instantly. That is why over 12,000+ professional technicians and home garage builders have switched to the EVOQUEPLUS® Flexible Magnetic Tool Tray Set: a bendable, non-marring polymer-and-silicone magnetic mat array powered by an embedded industrial rare-earth magnet matrix across three purpose-built sizes—Small (4.33"×4.33"), Medium (12.8"×4.33"), and XL Large (12.8"×9.64").

1. Locks Wrenches, Sockets & Fasteners Tight — Vertically, At Steep Angles, Even Upside Down

1. Locks Wrenches, Sockets & Fasteners Tight — Vertically, At Steep Angles, Even Upside Down

Weak bargain magnetic bowls lose holding force the moment you tilt them past 30 degrees, dumping washers, drain plugs, and hex bits straight onto the shop floor or under the subframe.

EVOQUEPLUS® embeds a dense multi-pole grid of industrial-strength rare-earth magnets across the full footprint of every tray—firmly anchoring heavy combination wrenches, 1/2-inch ratchets, deep sockets, screws, and drill bits whether mounted flat on an engine cover, vertically on a truck door, or upside down beneath a chassis.

“Had the XL tray stuck vertically on the inside of my truck door while swapping suspension parts, and nothing budged—not even tiny trim screws or heavy box wrenches.”— Jessica M., Verified Buyer
GIF · CURVED FENDER & VERTICAL GRIP 2. Bendable Contour Matrix Hugs Sloped Fenders, Rounded Hoods & Curved Motorcycle Tanks

2. Bendable Contour Matrix Hugs Sloped Fenders, Rounded Hoods & Curved Motorcycle Tanks

Modern vehicles barely have a single flat square inch under the hood, causing rigid steel and hard plastic trays to teeter, skate, and slide off curved sheet metal.

Engineered with a supple flexible core, EVOQUEPLUS® bends smoothly over crowned car fenders, rounded wheel arches, angled strut towers, motorcycle gas tanks, and uneven machinery housings—putting full surface-area friction and magnetic lock directly onto curves where stiff trays fail.

“Stays planted right on steep curved fenders and vibrating engine shrouds without sliding an inch. Every tool stays exactly where my hand reaches for it.”— David R., Verified Buyer
3. Non-Marring Pebbled Polymer Barrier Shields Delicate Clear-Coat Paint From Scratches

3. Non-Marring Pebbled Polymer Barrier Shields Delicate Clear-Coat Paint From Scratches

Setting bare chrome wrenches or hard stamped-metal magnetic dishes onto painted body panels is an expensive accident waiting to happen.

Every EVOQUEPLUS® tray encases its magnet array inside a soft, textured, non-marring PVC-and-silicone protective skin with raised red stitched-style perimeter curbing—cushioning painted fenders, powder-coated tool chests, and polished trim against scuffs, dings, and metal-on-metal contact.

“I used to drape shop towels everywhere out of fear of scratching customer paint. Now I slap this flexible mat straight onto the fender with zero marks left behind.”— Marcus T., Verified Buyer
GIF · 3-SIZE DRAWER & BENCH MATRIX 4. Three Purpose-Built Sizes Keep Every Socket, Wrench & Bolt Sorted — And Slide Flat Into Drawers

4. Three Purpose-Built Sizes Keep Every Socket, Wrench & Bolt Sorted — And Slide Flat Into Drawers

Piling tiny valve-cover bolts on top of greasy pry bars and ratchets in one round bowl wastes time and guarantees lost hardware mid-reassembly.

Our Best-Selling Complete 3-Piece Set equips you with three dedicated work zones: the Small Square Tray (4.33"×4.33") for screws, nuts, and drain plugs; the Medium Strip Tray (12.8"×4.33") for socket rails, extensions, and screwdrivers; and the XL Large Tray (12.8"×9.64") for full wrench sets, pliers, and ratchets—all ultra-slim to tuck neatly inside shallow tool-chest drawers.

“Having all three sizes changed how I tear down engines—bolts go in the small square, sockets on the narrow strip, and wrenches on the XL mat. Zero clutter.”— Amanda K., Verified Buyer
5. Oil, Grease & Brake-Cleaner Resistant — Wipes Spotless In Seconds With Zero Rust

5. Oil, Grease & Brake-Cleaner Resistant — Wipes Spotless In Seconds With Zero Rust

Fabric tool rolls soak up filthy motor oil permanently, cheap plastic trays warp near hot engine bays, and plated metal dishes chip and rust.

Built for grueling commercial repair shops, the sealed non-porous polymer surface shrugs off motor oil, transmission fluid, axle grease, coolant, and shop grime. When the job wraps up, one pass with a damp rag or shop towel leaves the tray looking brand new.

“Got used motor oil and anti-seize all over mine during a timing job—wiped it once with a shop rag and it looked fresh out of the box.”— Rachel P., Verified Buyer
★★★★★

“As a master technician with 23 years in commercial repair bays, I have tried every tool organizer on the market. This is the first tray set that actually conforms to modern curved body panels and vertical lift posts without marring paint. My entire shop switched over after seeing mine in action.”

Maria Rodriguez, Verified Buyer · ✔ Verified Buyer
6. Proven Across 12,000+ Auto Bays, Fleet Trucks, Motorcycle Garages & Home Workshops

6. Proven Across 12,000+ Auto Bays, Fleet Trucks, Motorcycle Garages & Home Workshops

From two-post automotive lifts and mobile service trucks to motorcycle builds, HVAC service panels, and home garage tool chests, mechanics love grabbing the Complete 3-Piece Set—or our 2× Complete 3-Piece Sets Bundle (6 Trays Total) to outfit both their main roll cab and road box with FREE Priority Shipping.

98% Reported zero dropped sockets or lost fasteners on curved fenders & vertical panels
95% Chose the Complete 3-Piece Set or 2-Set Garage & Truck Bundle with FREE Priority Shipping
* Results based on verified customer feedback survey.

7. End Dropped Hardware & Paint Scratches In 3 Effortless Steps:

GIF · 3-STEP ATTACH, WORK & WIPE CLEAN 7. End Dropped Hardware & Paint Scratches In 3 Effortless Steps:
01
1. Attach Instantly To Any Surface Place the flexible magnetic tray onto any steel fender, truck door, lift column, or curved workbench—the magnet matrix conforms and locks immediately.
02
2. Organize Tools & Fasteners By Zone Set wrenches, ratchets, sockets, screws, and bits onto the Small, Medium, and XL trays so every part stays locked right within arm's reach.
03
3. Wipe Clean & Slide Into Your Drawer Wipe away oil or dust in seconds with a cloth, then slide the slim low-profile trays flat into any shallow toolbox drawer!

WHY 12,000+ MECHANICS & GARAGES DITCHED RIGID METAL BOWLS

High-density embedded rare-earth magnet matrix, bendable non-marring PVC/silicone outer shell, oil & grease resistance, and 3 slim toolbox-ready sizes.

Feature EVOQUEPLUS® Flexible Magnetic Trays Rigid Metal Bowls / Plastic Trays
Curved & Vertical Grip ✅ Bends & locks securely on curved fenders, doors & lift posts ❌ Slides right off sloped hoods, curves & vertical panels
Paint & Finish Protection ✅ Soft non-marring polymer barrier prevents clear-coat scratches ❌ Hard metal rims gouge paint, chrome & powder coating
Vibration & Angle Hold ✅ Full-footprint rare-earth magnet grid holds even upside down ❌ Single center magnet tips and spills parts under vibration
Multi-Zone Sorting ✅ 3 tailored sizes: Small (4.33"), Medium (12.8") & XL (12.8"×9.64") ❌ One cramped round dish jumbles greasy bolts & tools together
Oil & Chemical Cleanup ✅ Sealed oil/grease-resistant skin wipes clean in seconds ❌ Traps grime in seams, warps near heat, or chips & rusts
Drawer Storage & Guarantee ✅ Ultra-slim flat profile fits shallow drawers + 90-Day Guarantee ❌ Bulky tall bowls jam shallow mechanic tool-chest drawers

Over 12,000+ Mechanics, Fleet Techs & DIYers Call It Their #1 Fender & Toolbox Upgrade

Olivia W.
Olivia W. ✔ Verified 3 hours ago · ★★★★★

“I used to lose trim screws constantly while working under the hood. These flexible trays solved that completely—even sticks vertically to my garage lift post!”

Jennifer W.
Jennifer W. ✔ Verified 8 hours ago · ★★★★★

“What I love most is how smoothly they hug curved fenders and tool chests without leaving a single mark on the paint. Total game changer.”

Daniel Walker
Daniel Walker ✔ Verified 1 day ago · ★★★★★

“Super tough, heavy-duty feel compared to metal bowls that rust or skate around. Grabbed the Complete 3-Piece Set with free shipping and use all three daily.”

Donald Cooper
Donald Cooper ✔ Verified 2 days ago · ★★★★★

“Ordered the 2× 3-Piece Bundle so I have 3 trays in my garage roll cab and 3 in my service truck. Haven't dropped a single 10mm socket since!”

Lock Wrenches, Sockets & Fasteners To Any Curved Or Vertical Surface — 50% OFF Today

Complete 3-Piece Set: Small (4.33"×4.33") + Medium (12.8"×4.33") + XL Large (12.8"×9.64") · Non-Marring Flexible Contour · Oil & Grease Wipe-Clean + FREE Priority Shipping!

EVOQUEPLUS® Flexible Magnetic Tool Tray Set
UP TO 50% OFF
LIMITED TIME ONLY!

This limited-time deal is in high demand and stock keeps selling out.

CLAIM 50% OFF YOUR TRAY SET TODAY →
🛡️ Put them to work on curved fenders, vertical lift columns, engine bays, and rolling tool chests for 90 days—backed by our No-Questions-Asked Money-Back Guarantee!

Comments (3)

Robert Kim
Robert Kim

Does this really stay put on steep curves like motorcycle gas tanks and rounded truck fenders? And which bundle gives you all three tray sizes?

Reply 31 min
Mark Chen
Mark Chen

@Robert Kim Yes! Because the magnet matrix is embedded in a flexible non-marring shell, it wraps right around cruiser fuel tanks and crowned fenders without slipping or scratching clear coat. Go with the Complete 3-Piece Set ($105.99 Best Seller — includes Small 4.33"×4.33", Medium 12.8"×4.33", and XL 12.8"×9.64" + FREE Priority Shipping) or the 2× Complete 3-Piece Sets Bundle ($189.99 for 6 Trays Total, saving $22 + FREE Priority Shipping)!

Reply 14 min
Michelle Rodriguez
Michelle Rodriguez

Been running the 3-piece set in my auto bay for three months now. My old steel dish scratched a customer's freshly painted hood—never going back to rigid metal trays again!

Reply 2 h
Emily Nunez
Emily Nunez

Are they thin enough to leave inside shallow rolling tool-chest drawers when you close them?

Reply 4 h
Marie Campbell
Marie Campbell

@Emily Nunez 100%! Unlike tall round magnetic bowls that jam top drawers, all three trays lay super flat right inside shallow mechanic drawers and even keep your wrenches from sliding when you roll the box.

Reply 2 h