I Ruined A 14-Hour Resin 3D Print Snapping Supports With Flush Pliers… Until This 40kHz Cordless Ultrasonic Cutter Sliced Through Like Warm Butter
If you have ever heard that sickening 'CRACK' while prying dense SLA resin supports off a miniature, fighting a dragging hobby scalpel across thick acrylic or leather, or waiting endlessly for an overheating rotary tool to cool down, you already know how easily manual blades destroy hours of meticulous work.
Ordinary hobby knives rely on brute wrist force—causing blades to bind, flex, gouge delicate surfaces, or slip dangerously toward your fingers. Meanwhile, industrial benchtop ultrasonic cutters have historically been tethered to heavy power bricks costing $450+. That is why over 50,000+ 3D printing enthusiasts, scale modelers, leatherworkers, and DIY fabricators are switching to the EVOQUEPLUS® 40kHz Cordless Ultrasonic Precision Cutter Kit: a handheld 2-in-1 ultrasonic cutter, grinder, and polisher that vibrates its blade 40,000 times per second to glide effortlessly through resin, PLA, ABS, carbon fiber, PCB, acrylic, wood, foam, and leather—with an AI-controlled 13,000 RPM cooling fan for 60+ minutes of non-stop cordless freedom.
1. 40,000 Micro-Vibrations Per Second Turn Tough Materials Into Effortless, Burr-Free Glides
Manual craft knives force you to press hard until the blade suddenly snaps through—leaving jagged stress marks, cracked resin, frayed leather edges, or chipped plastic sprues.
EVOQUEPLUS® drives its precision chuck at a true 40kHz ultrasonic frequency (40,000 microscopic strokes every second). Friction drops to near zero, letting you part SLA resin supports, PLA, ABS, PC, acrylic, carbon fiber, PCB fiberglass, wood, plywood, foam, and heavy leather with feather-light finger guidance.
2. True Cordless Freedom With OLED Status Display & Illuminated LED Precision Tip
Traditional ultrasonic cutters chain you to a bulky desktop transformer with a stiff, heavy umbilical cord that constantly snags on models, clamps, and cutting mats.
Our Cordless Pro Lithium Edition packs high-discharge lithium power directly inside an ergonomic pen-grip barrel—complete with a crisp OLED mode/battery display, a shadow-free front LED work ring, and fast 30W/35W USB-C PD recharging so you can move freely around any project.
3. AI Cooling System + 13,000 RPM Auto Fan Delivers 60+ Minutes Of Continuous Cutting
Compact cordless hobby tools notoriously overheat within 5 to 10 minutes—throttling power, warming the grip uncomfortably, or gumming up thermoplastics instead of slicing cleanly.
EVOQUEPLUS® integrates smart AI thermal management paired with an internal 13,000 RPM automatic cooling fan and dual side exhaust vents, actively channeling heat away from the transducer so you can cut and finish for 60+ minutes straight.
4. 2-in-1 Ultrasonic Cutter, Grinder & Polisher — Cut & Smooth Edges With One Tool
Cutting a part free is only half the job—normally you still have to dig out sanding files, rotary drums, and buffing sticks to clean seam lines, nubs, or light oxidation.
Swap from any of the 50 included surgical-grade blades to the included ultrasonic polishing/grinding attachments in moments. Smooth 3D layer lines, flush-finish sprue nibs, burnish leather edges, clean PCB pads, or detail wood carvings without switching machines.
5. Dual Smart Power Modes (Auto + On) With Child Lock & Auto-Standby Protection
High-frequency blades demand intelligent safety—especially in busy home workshops or when alternating between dense carbon fiber/PCB boards and paper-thin model decals.
Switch effortlessly between Auto Mode (adaptive power boost for tough resin, acrylic, wood, and PCBs) and On Mode (steady micro-control for delicate detailing), backed by a built-in Child Lock, smart idle Standby System, and twist-fit protective safety cap.
“I used to spend 45 minutes sanding ugly craters left behind after snapping off resin supports. With this 40kHz cordless ultrasonic cutter, the blade literally melts through thick support trees with zero pressure and zero white stress marks—then swaps straight to polishing.”
Ethan R., Verified 3D Print Maker · ✔ Verified Buyer
6. Ships Complete With 50 Interchangeable Blades, Polishing Kit & Zippered Case
Instead of nickel-and-diming you on proprietary replacement refills, every EVOQUEPLUS® kit arrives fully stocked with 50 interchangeable precision blades across multiple chisel, angled, curved, and fine-point profiles—plus polishing accessories, hex wrench, USB-C cable, and a rugged storage bag.
7. Slice, Grind & Finish Any Project In 3 Effortless Steps:
WHY 50,000+ MAKERS UPGRADED TO EVOQUEPLUS® 40kHz ULTRASONIC
40,000 Hz micro-vibrating ultrasonic blade, 2-in-1 cutting/grinding/polishing chuck, 13,000 RPM AI cooling fan, OLED dual-mode control & 50 included blades.
| Feature | EVOQUEPLUS® 40kHz Cordless Cutter | Hobby Knives / Basic Rotary Tools |
|---|---|---|
| Cutting Mechanism | ✅ 40kHz ultrasonic vibrating blade slices smoothly with zero drag | ❌ Manual blades bind, crack brittle resin & leave rough burrs |
| Thermal Endurance | ✅ AI cooling + 13,000 RPM fan & dual vents for 60+ min continuous use | ❌ Compact tools overheat in minutes and melt plastic edges |
| 2-in-1 Versatility | ✅ Cuts, grinds, polishes, removes supports & smooths surfaces | ❌ Single-purpose cutters require separate sanding & rotary tools |
| Material Range | ✅ SLA resin, PLA, ABS, PC, acrylic, PCB, carbon fiber, wood, leather & foam | ❌ Struggles on cured resin, fiberglass PCBs, or thick acrylic |
| Smart Safety Suite | ✅ Auto/On modes, OLED screen, standby protection, child lock & cap | ❌ Exposed fixed blades slip easily with zero electronic safety |
| Included Accessory Value | ✅ 50× multi-profile blades + polishing kit + storage bag + FREE shipping | ❌ 2–5 blades included; costly refills & bulky bench cords |
Over 50,000+ 3D Makers, Model Builders & DIY Craftsmen Call It A Bench Essential
“Game-changer for SLA resin 3D prints! Thick support pillars drop right off without leaving divots or snapping delicate fingers and antennas.”
“That 13,000 RPM cooling fan actually works. Trimmed foam inserts, acrylic panels, and PLA brackets for nearly an hour straight without overheating.”
“Got the Cordless Pro Lithium Kit—50 extra blades in the zippered pouch is insane value, and slicing heavy saddle leather curves is effortless.”
“Cleanest sprue and plastic trim cuts I've ever made on scale models. Zero stress whitening and the polishing attachment finishes joints fast.”
Cut, Grind & Polish With Burr-Free 40kHz Precision — 50% OFF + FREE Shipping Today
40kHz Ultrasonic Micro-Vibration · 2-in-1 Cutting, Grinding & Polishing · 13,000 RPM AI Cooling Fan (60+ Min Continuous Use) · Auto/On Modes + Child Lock · 50× Replacement Blades & Storage Bag Included!
This limited-time deal is in high demand and stock keeps selling out.
CLAIM 50% OFF + 50 FREE BLADES →
Comments (3)
What's the difference between the Cordless Pro Lithium Kit and the Plug-In Bench Edition, and what charger does the cordless one take?
@Brandon Mercer Great question! The Cordless Pro Lithium Kit ($189.99 Best Seller) has a built-in rechargeable lithium battery for untethered 60+ min use anywhere and charges via a USB-C PD 15V/2A (30W or 35W) charger. The Plug-In Bench Edition ($169.99) runs directly plugged in for stationary bench work and includes 4 cut-resistant finger sleeves + magnetic pad. Both include 50 blades and ship FREE!
Picked up the Cordless Pro Kit for cosplay EVA foam armor and resin props—cuts beveled seams cleaner than any fresh box cutter I've ever owned!
Can this cut fiberglass PCB boards and thin carbon fiber RC plates without fraying the edges?
@Derek Halvorsen Yes! Put it in Auto Mode and take light passes—I use mine on FPV drone carbon plates, prototype PCBs, and ABS housings all week. Super crisp edges.