EVOQUEFIT · WORKSHOP ESSENTIALS
One setup. A whole kitchen of aligned handles.
Make the finishing detail feel like part of the plan. Set your hole spacing and edge offset, then carry the same layout from one matching cabinet front to the next.
Less measuring. More progress.
Uneven pulls can distract from an otherwise beautiful renovation. Adjustable drill guides give your bit a defined path, while the edge stops help you return to your chosen position.
- Knobs & pulls: adjustable spacing up to 12 inches between hole centers.
- Repeat your layout: lock the guides and stops for matching doors or drawers.
- Read your way: engraved inch and metric scales.
- Built for the workshop: anodized aluminum body, steel bushings and stainless steel thumb screws.
- Pack it away: fitted carrying case keeps the kit together between jobs.
Set. Check. Drill.
- Match your hardware. Adjust the drill guides to the handle’s hole spacing.
- Choose the position. Set the offset and confirm alignment on the cabinet front.
- Secure and drill. Tighten the knobs, support the workpiece and drill through the guides. Use a scrap backer to help limit tear-out.
- Repeat on matching fronts. Keep your settings for equal-sized pieces; recheck whenever dimensions change.
Specifications
| Handle hole spacing | Up to 12 in center-to-center |
|---|---|
| Centering with end stop | Up to 18 in; larger fronts can use a center mark |
| Drawer-front centering height | Up to 16 in |
| Minimum stile / rail width | 1/2 in |
| Minimum edge offset | 1/4 in |
| Drill bushings | 5 mm diameter × 1/2 in long |
| Weight with case | 4.3 lb / approx. 1.95 kg |
What’s in the kit
Adjustable cabinet hardware jig, carrying case, 5 mm drill bit, hardware spacing pins, Shaker drawer spacers and magnetic bushing covers. Power drill and cabinet handles are not included.
Before your first hole
Check your handle spacing, screw size and panel thickness before drilling. Test the setup on scrap material first. Use the Shaker spacers to support recessed drawer panels, and recheck the guide settings before each new run.