Gasoline engine compression test kit with pressure gauge and red case
Quick coupler and four brass spark plug adapters
Straight and angled push-on adapters
Compression gauge quick-release coupler detail
Cylinder compression gauge for gasoline engine diagnostics

EVOQUEFIT Gasoline Engine Compression Tester Kit with Carry Case

Regular price$78.90
/
Tax included. Shipping calculated at checkout.

  • See the setup guide and compatibility notes below
Choose your setup

This site is protected by hCaptcha and the hCaptcha Privacy Policy and Terms of Service apply.

EVOQUEFIT · GARAGE ESSENTIALS

Start with a reading. Plan the next repair.

When an engine feels down on power, a compression check gives you another piece of the picture. Compare cylinders and use the vehicle’s service specifications to guide the next inspection.

Quick coupler and four brass spark plug adapters

A practical kit for gasoline engines

  • Readable analog gauge: view cylinder pressure directly.
  • Flexible hose: route the gauge around accessible engine-bay components.
  • Four brass adapters: M10, M12, M14 and M18 fittings for compatible spark-plug ports.
  • Two push-on probes: straight and angled rubber-cone options.
  • Quick connection: connect the hose or probe at the gauge coupler.
  • Fitted carrying case: keep the gauge, hose and fittings together.

From symptom to comparison

A low reading or a difference between cylinders can help determine where further investigation is needed. Compression readings alone do not identify a specific failed part; compare them with the manufacturer’s test method and limits.

Prepare. Connect. Read.

  1. Identify the correct spark-plug thread and confirm adapter reach.
  2. Prepare the vehicle and disable ignition and fuel delivery as directed by the service manual.
  3. Fit the suitable adapter and connect the gauge securely.
  4. Crank and record readings using the specified procedure. Release gauge pressure before disconnecting.

Straight and angled push-on adapters

What’s in the case

Measurement Cylinder compression pressure
Engine type Compatible gasoline engines
Threaded adapters M10 / M12 / M14 / M18
Other components Analog gauge, flexible hose, straight probe, angled probe and carrying case

Will it fit my engine?

Check thread diameter, pitch, reach and access before purchase. A matching thread diameter alone does not guarantee fit. Intended for gasoline compression testing; not a diesel compression tester or a leak-down tester.

Use the vehicle’s service procedure. Keep clear of moving components, hot surfaces and ignition sources, and wear suitable eye protection. Vehicles and workshop equipment in application images are not included.


Recently viewed